Quartz Halogen Infrared Lamp 450mm 230v 500w for Injection Machines

June 8, 2026

We built the Quartz Halogen Infrared Lamp for one place and one place only: injection molding machines. Because on the line, you need heat fast—right where you need it—without turning the whole barrel into a sauna. So we made it 450mm long and 500W. Not by accident. That size is a direct fit for the heating zones on standard barrels, and the power density is enough to keep your screw and melt temperatures steady, even when the day gets busy. And it runs on 230V, which makes wiring it into your plant’s power setup straightforward. No reworking the machine’s electrical system. Just connect it and get back to work. Power, voltage, length: why it matters At 500W and 230V, the heat input is predictable. That’s a big deal because it helps your injection machine’s control loops keep the melt profile repeatable—shot after shot. The 450mm length covers the axial space you typically need for barrel heaters, so it drops in without field modifications. And because the current draw stays manageable, you get less stress on terminals and easier thermal management around the heater clamp. What it’s made of, and why it holds up The quartz envelope can take serious heat and stays optically clear, so the infrared output stays efficient. Inside, the halogen cycle keeps the filament stable, resisting blackening and helping the lamp last through repeated heating and cooling cycles. For connections, we offer termination options like R7s or Sk15—choices that stay secure at high temperatures, and that can survive the heat and vibration inside a machine enclosure. What this means on the injection molding floor On the machine, the lamp zeroes in on the barrel heating zones and responds quickly when the process calls for heat on demand. That stability helps you keep melt temperature consistent, which supports steady shot weight and consistent part quality. And when a heater does need replacing, the compact footprint and standardized dimensions make the swap simple—minimizing downtime. One thing to keep in mind: the heat density is high, so your machine’s cooling and clamping setup needs to be properly spec’d to keep nearby components within safe temperature limits.