A Quick Guide to our 200mm 300W Halogen IR Lamps
Let’s get one thing straight: these aren’t your typical light bulbs. If you’re looking to light up a room, keep scrolling. These are short-wave infrared emitters. Their whole job is to punch heat directly into your material without wasting energy heating up the air around it. It’s fast, focused, and efficient. Why 300W? When we spread 300W across a 200mm length, you get a very specific kind of heat. It’s a “sweet spot.” It gives you enough punch to get the job done, but it isn’t so aggressive that you’ll scorch your surface. If you go too high on the wattage for a lamp this size, you start getting hot spots—and nobody wants a ruined batch of parts. This setup is perfect for thinner plastics or those finicky coatings that need a gentle touch. The Magic Inside We build the outer shell from high-purity quartz. Why? Because quartz can handle the shock of being turned on and off rapidly without cracking. Inside, there’s a halogen gas doing some heavy lifting. As the tungsten filament heats up, it evaporates and then redeposits itself back onto the wire. This keeps the glass crystal clear. No black soot, no dimming—just consistent heat for the life of the lamp. Getting Them Running Wiring these in is pretty painless. They’ll work with most standard industrial controllers, so you can just pop them into your drying tunnels or PET heating stations and get back to work. But here’s a pro tip:keep your reflectors clean. Even though 300W is a moderate load, that filament is running white-hot. If dust builds up on your reflectors, your efficiency drops and the heat distributes unevenly. That’s a recipe for a cracked lamp. Keep the area debris-free, and your bulbs will last a lot longer.